Follow via Facebook Follow via Twitter Follow via Google Follow via RSS
Log In

Log In

Forgot Your Password?

Cart Subtotal: $0.00

Tag Archives: dumbbell collars

  • Garage Gym Accessory Wall

    power-shack-grip-board
    Carmen Caputo's Grip & Accessory Board

    Carmen Caputo's Power Shack Gym really is one of the best garage gyms out there. This is the second Atomic Athletic Bomb Proof Bulletin based on his place. It is a true unattached pole barn type 2-car + size garage, that is exclusively a gym. Carmen and his buddies completely finished it off, with heat. I can really appreciate that right now, as it's -5 F as I write this.

    The photo shows The Power Shack accessory corner, highlighted by the peg board. Hanging on the bottom are real antique Whitely spring type strand pulling units, with all the original Whitely accessory parts. He has them set up with 1-5 springs, just like a pro-style dumbbell or kettlebell rack. You also see an original cloth webbing York head harness and York wrist roller, together with some home made loading pins.

    http://atomicathletic.com/store/index.php/atomic-athletic-firestorm-wrist-roller.html

    Carmen and I had a great talk about the wrist rollers. We are both really into the wrist roller movement and concept. Carmen actually has two of those originals, but he stripped the paint off the one shown in the picture and poly coated it. I also have an original red painted one that I will show in a wrist roller article that is coming down the pike. Carmen's wrist roller advice is to, “...put a longer rope on your wrist roller, when it comes time to replace it. If you have a longer rope, you will find a way to use it. It's the basic simple details that the old strength guys were into, and that made all the difference. The longer rope is murder on your hands. Once you unroll it, you have to roll it back up before you can put it away.”

    In the floor rack you can see a variety of bars. He has an original Gaspari Bar, a 6 foot standard barbell, a 6 foot Olympic bar, a regular Olympic curl bar, an Olympic Super Curl Bar and an Olympic Hammer Curl Bar. He also has quite a pile of standard size plates.

    Rounding out the collection is a Power Twister, an Iron Man Super Gripper and a variety of rubber rings. The left wall also shows his framed original York Powerlifting Chart #2 (Bench Press). The other wall has his lat machine attachments (like the triceps rope), with the lat machine in the foreground. That padding is not the original naugahyde, but that cool late-60s glitter black that you may have seen on boat or motorcycle seats. He has re-upholstered everything in to match.

    All the best,
    Roger LaPointe
    'Today is a good day to lift.”

  • Check out Carmen's Gym

    carmen-caputos-york-kettlebells
    Carmen Caputo's Gym: Photo 1
    (Photo by Carmen Caputo with Permission)

    Check out what Carmen Caputo has put together! Seriously, put on your 7 year old kid attitude, with big excited eyes. We are going to take a walk back in time, to the days when afternoons were long and sunny. This is one of those days when opening this plain garage door seems somewhat slightly more interesting than kicking stones in an alley, then suddenly your whole life is changed.

    Carmen's gym really exists and he has been an Atomic Athlete since before I was born. He has been seriously weightlifting and collecting equipment since 1960, with most of it originally coming from Peary Rader and York Barbell. For the past several years, he has been adding in some Atomic Athletic pieces, supplemented by collectibles that have come from me, eBay and other random sources.

    The photo shows his “Kettlebell Rack”. Where he has put together classic kettlebells built with kettlebell handles and all York standard size plates, bars and collars. He has pairs of them in 10 pound increments from 20 – 60 pounds*, which he occasionally modifies for mid-range increments. You can also see his collection of Iron Boots. Not all of his pieces were acquired new, but you can see how everything is now in pristine shape and order, ready for the next workout. Carmen follows the rule he was taught in the Marines, “If you take care of your gear, it will take care of you.”

    Kettlebell Handles: http://atomicathletic.com/store/index.php/kettlebell-handles-pair.html

    Now, take a gander at the gym art. Those instructional wall charts are originals. He has framed classic posters and other art all over the gym. I have a bunch of great shots that I will be showing in the next few weeks. Keep an eye out for it. Everything is solid, basic and high quality.

    To quote Carmen, “Only in America could the grandchild of immigrants be able to acquire something like this. We are truly blessed.” You may not remember when you were first introduced to weights, but it would be great if we could all be so fortunate as to find a place like this to start from.

    All the best,
    Roger LaPointe
    “Today is a good day to lift.”

    *Not all of Carmen's kettlebells are shown in this photo.

  • Masters Dumbbell Techniques II

    Growing up, I had the concept of stretching drummed into my head with every sport I did. I still believe it's a good idea, but not the way it was promoted thirty years ago.

    Olympic dumbbell clean & jerk
    Olympic dumbbell clean & jerk

    Dumbbells are the perfect tool for the type of stretching I now prefer, especially for ballistic movements. As a Master's Age lifter, otherwise known as an old guy lifter, I have found this method to be essential, if I don't want ruin my next workout. I call these Dumbbell Flex Reps. I first learned this technique as a part of my lower body training, working with Fred Lowe, but I have really expanded it. I now do some sort of Flex Rep training with every workout.

    I don't have time for marathon training sessions. Instead of doing endless stretching, like some aging athletes, I abbreviated my warm-up period, with actual training. As regular readers know, for almost seven years I have used the Indian Clubs at the beginning of every workout, instead of much of the early stretching I used to do. I may do more Indian Club work in the workout, but I always to some at the beginning. The Flex Reps have eliminated most of the rest of my stretching, as well as some of the explosive movement warm-up sets.

    This is really a simple method. It is based on using a full range of motion in the movement, so barbells and kettlebells are not your best tool for the job. In many exercises, barbells and kettlebells cut the actual range of motion or leverage force factor, compared to a dumbbell. You will need to have a variety of dumbbells. They do not need to be huge, as I never use more than 60% of my 1 rep max in a related lift. In fact, depending on the movement, I may only use 30-40%. If you have an entire rack of dumbbells, good for you. I generally prefer adjustable dumbbells, but I do have a job specific selection. A nice pair of rotating Olympic Dumbbells and a couple pair of adjustable standard size dumbbells will do the job. However, I am not a fan of the Standard Spin-Lock Dumbbell Bars with the threaded rod. The collars always come loose, resulting in floppy plates. Always make sure to use decent collars on dumbbells.

    http://atomicathletic.com/store/index.php/dumbbells/plate-loadable-dumbbells/adjustable-olympic-dumbbell-handle.html

    This is what you do. As you move through the range of motion for that movement, you continuously flex. Sounds simple. Now try it.

    As an example of actual training, think of the overhead barbell squat, which has a snatch grip. I used to do a ton of work stretching with a broom stick, easily taking up 5-7 minutes. Today, I will do a variety of dumbbell curls Flex Repped, and maybe 30 seconds with the broom stick. It also allows me to skip some of the “warm-up” sets and move into the heavier weight faster. I kill two birds with one stone. I am getting in some biceps training and prepping for the compound movement.

    When I am getting ready to do one hand movements, like a one hand dumbbell swing or one hand dumbbell snatch, I do a similar routine for my shoulders and forearms. My preferred dumbbell of those small muscles is a rotating Olympic Dumbbell Handle. Nobody doubts using one for the one hand dumbbell snatch, for the same reason you use it for the shoulder and forearm warm-ups. You do not want jerkiness. The entire Flex Rep needs to be smooth.

    Try it for yourself. I wish I had been doing this method when I was in my twenties, because half a lifetime later, it is fantastic.

    All the best,
    Roger LaPointe
    “Today is a good day to lift.”

    PS Don't forget that today is the last day for the FREE Banner on orders over $250. Refer to your “Elves in the Warehouse” Bulletin for details.

  • Black Friday Specials

    Throughout the month of November we will be adding various specials.  We are not doing anything

    SPECIAL: Kettlebell & Iron Boot Boxed Set SPECIAL: Kettlebell & Iron Boot Boxed Set

    just for Black Friday.  However, most of our Specials will be of limited supply, so when they sell out, they are gone and will be pulled from the site!

    Here are 2 great Specials:

    Iron Boot & Kettlebell Boxed Set: http://atomicathletic.com/store/index.php/kettlebell-iron-boot-boxed-set.html

    Bob Hoffman & York Barbell Holiday Special: http://atomicathletic.com/store/index.php/holiday-special-featuring-bob-hoffman-york-barbell.html

  • Cheap & Easy

    “Cheap and easy” is rarely a good thing.

    “Cheap and easy” are the only two positive descriptive terms for spring collars. Because they are cheap, they seem to be the favorites of most gym owners. Clearly, it is not because they work well. This is how they work. When they actually fit on a barbell end, you merely have to squeeze them

    Standard Size Allen Collar & Short Dumbell Bar Set Standard Allen Collar & Short Dumbell Bars

    and they slide right on. The benefits end there.

    As you may have guessed, this Atomic Athletic Bomb Proof Bulletin is about barbell and dumbbell collars. It's true, I am a little obsessive compulsive about the collars I use. Like many terms in this industry, it is easy to come up with innuendo, but I will try to keep things serious. Barbell and dumbbell collars have a genuine and serious purpose. They are meant to hold the plates on the end of your bar. Because of the ways barbells are used, relative to the ways dumbbells are used, I feel the issue is typically most serious for dumbbells.

    Two Types of Collars
    There are two types of collars: screw type collars and compression collars. Screw collars have what is called a set screw that is pressed into the bar end. Compression collars reduce the inside diameter of collar to hold the bar. There are several ways this can be accomplished.

    Spring Collars are a perfect example of a compression collar. Generally, I highly recommend a compression collar, except when it is a spring. Spring collars do not have a flat face, so your plates are always going to be floppy and loose. More than that, their springiness reduces over time and they eventually become so loose that they simply don't hold. Of course, that plays right into the other reason I hate them. I also dislike them from a business perspective. When I worked for York Barbell, we got them in loose shipments in giant wooden crates. I found that about thirty percent of them were so loose, right from the factory, that they had to be discarded. Someone had to stand there and try out every one, otherwise the customer would get bad collars. I really don't like spring collars.

    Spin-Lock Collars
    http://atomicathletic.com/store/index.php/collars-olympic-2-spin-locks-from-york-barbell-pair.html

    I like Spin-Lock Collars. The spin-lock collars most people are familiar with are used on Olympic bar

    York Barbell Spin-Lock Olympic Collars

    ends, have wing nuts, weigh about 5 pounds each and are easily identified by the large “star” shaped part. I sell the ones made by York Canada. I had one customer pissed off at me because York USA shows a crappy Chinese version on their web site. The photo in this bulletin is of the ones we sell. Anyway, they are lined with leather and the wing nuts compress the collar onto the bar. The spinning star shaped end is threaded on the inside and used for tightening the plates down. In an ideal world, this is the very best type of collar to use. In fact, it is the only type of collar I will use on Olympic Dumbbell Handles, especially for lifts like Dumbbell Cleans, the One Hand Dumbbell Snatch and most importantly on the One Hand Dumbbell Swing. I don't want plates that are loose, flopping around, or worse yet, sliding off. Any of those scenarios smack of danger, if you pardon the pun.

    Allen Collars
    I also have some awesome Stainless Steel Standard Size Allen Type Spin-Lock Collars. These

    Stainless Steel Super Allen Collars Stainless Steel Super Allen Collars

    are over kill and I love them.  Each collar has a double set (that's 4, if you're counting) of allen screws.  So, not only do these spin-lock, but you can anchor the spin-lock with a pair of allen screws.  These are now my favorite for the One Hand Dumbbell Swing.  For that lift, I actually use a proto-type pair of pro-style dumbbell bars, with steel end plates.  The way I set it up is with the end plate on the end that is sitting on the ground, then the other end gets the collar.  I have an old, as in antique, knurled dumbbell handle like you would get with the old York Barbell Aristocrat Set.  This is my spacer for grip.  Then the collar tightens everything down, so there is no slop or rotation.  You can see the lift at this link:

    http://atomicathletic.com/store/index.php/long-dumbbell-bar-collars.html

    Regular Allen Collars
    Our regular Standard Size Allen Collars are significantly cheaper than the ones above, but they are also compression type collars that hold like crazy. I use these all the time. For standard size bars, they have become my “go to” collars when I am making up a dumbbell, odd-ball barbell, leverage/mace set-up, you name it. They are really narrow with a single allen type counter-sunk screw that actually closes the ring size of the collar. The allen screw is very low profile, so it does not seem to catch on your clothes, like wrenchless screws can.

    Little Allen Collar Story
    Our Standard Size Allen Collars are made in the USA out of real spring steel. Back in 2007, the price went up on these, so I tried out a knock-off version that was made in India. My analysis was “total crap”. I know, not very scientific, but they had the size off by a couple thousandths... too small. I figured, I would just pry them open, maybe the spring steel had compressed in shipping. Wrong. They just broke. End of the knock-off test. I went back to my trusted American made steel and good old American machine shop and raised the price. There really is no substitute. Lesson learned.

    http://atomicathletic.com/store/index.php/collars-allen-collar-set-of-4.html

    Set Screw Collars
    We have many more collar types that fit into the set-screw category: Classic Red Wrenchless Screw Collars, Heavy Duty 3/4 Pound Wrenchless Screw Collars, Chrome Standard Barbell Collars, Olympic Allen Collars and many more.

    Once you use the right collars for the right job and then have to go to a buddy's place and use the wrong collars, you will suddenly understand the importance of getting it right. Use the right tool for the right job, or lift, as the case may be. Beware of “Cheap and Easy”.

    All the best,
    Roger LaPointe
    “Today is a good day to lift.”

5 Item(s)

per page